T shirt cutting ideas racerback photo

Date: 15.10.2018, 12:12 / View: 41231

I was going to say something here like, “wow, it’s been ____ since I’ve posted a tutorial!”  But then I started scrolling back and decided the fill-in-the-blank was too embarrassing to put in type.  So let’s just say: awhile!

So here it is, my first tutorial in WAY too long, and my first ever pattern made available just for you fine Crafterhours readers, for the low low price of FREE!

If you saw Susan’s posts on Friday, you know that we’re currently involved with a project to send simple dresses to little girls in Africa, dresses that are weather appropriate and don’t have buttons or zippers that can break.  Well, it doesn’t get much simpler than this.  If you have an hour and a yard of fabric to spare, you could whip up two of these racerback dresses and make a difference in the life of a little girl in need.

So let’s jump in.
First gather your materials.  You’ll need:

– The Pattern!  .

– 1 yard of knit fabric (You’ll have a ton left over but due to the direction of stretch, you’ll need to start with this much.  You can fit a 12-18 month size on 3/4 yard.)  Good knits for this project include jersey, stretch jersey, interlock, or anything with a little stretch.  A baby rib (1×1) will work, but will be harder to keep from stretching as you sew.  Steer clear if you’re a knit newbie.

– Coordinating stretch fabric for the binding.  Rib knit is a great option here, but a stretch jersey will work perfectly too.  You will need three 20″ x 2″ lengths of this, with the direction of stretch going lengthwise.  A good option is just to cut off a 2″ length from selvedge to selvedge on 60″ wide knit fabric, if you have it.

– Thread that matches your binding fabric.

– Computer, printer, tape, scissors

Please note:  

– All seam allowances are .5″ unless otherwise stated.

– I made this tutorial using only my sewing machine, but for those of you who have a serger, feel free to use that for everything except the gathering stitch and hem.  For those of you who don’t have a serger, don’t feel like you’re missing out.  I actually find that this dress comes together just as easily and more accurately using a sewing machine because I have a bit more control.

– Finished garment measurements:

sizechartthis is the length for the larger size (the 8 in the size 7-8, for example).  You will make a deeper hem for the smaller sizes so they will be an inch or an inch and a half shorter (and can be let out to fit for another year!)

Step 1: 
Read the printing directions on the second page of the pattern before printing.  Tape each page together by matching up the letters encased in half-circles.  Be sure you’re taping within the pattern, not in the empty white space.  You will have a front piece, a lower back piece, and an upper back piece.  Cut out the appropriate size.

Step 2:
Lay each pattern piece along the fold of your fabric and cut around the edges to produce one symmetrical piece.

 

Step 3:

Cut your binding fabric.  Cut 1 60″ by 2″ strip from selvedge to selvedge, or if you don’t have fabric wide enough to do this, cut three 20″ by 2″ strips.  (for you metric fans, that’s 152 x 5 cm, or 51 x 5 cm)

Make sure you are cutting perpendicular to, or against the fabric grain.  The binding strip should stretch along the long edge.

Iron the binding in half lengthwise, wrong sides together.

Step 4:

Transfer the gathering marks to the front and lower back pieces.  Make sure you flip the pattern and mark the fabric on both sides of the original fold.

 

Here is the front piece with the start and stop points marked for gathering.  I used an air-soluble fabric marker on the wrong side of the fabric.

 

Step 5:

Using the longest stitch length on your machine, stitch about 1/4 away from the edge between the markings.  Gently pull the bobbin thread to gather the fabric as closely as possible.  Return to a normal stitch length and stitch over your previous stitching to hold the gathers in place.

Step 6:

Repeat steps 4 & 5 for the lower back piece, gathering until it matches the lower edge of the upper back piece.

Step 7:

Sew the upper back to the lower back, right sides together.

Step 8:

Sew one front and back shoulder seam, right sides together.  Leave the other one open for now.

Step 9:

The next seam will need to allow for some stretch, so a straight stitch is not recommended.  Use the “stretch stitch” option on your machine, or if you don’t have one, set your machine to a zig zag stitch.  The width should be slightly narrower than default, for my machine this is around a 2.  The stitch length can be lengthened slightly, for me this is around 2.6.

Step 10:

Place the two raw edges of the folded binding even with the raw edge of the neck at the open shoulder seam.  Sew through all 3 layers of fabric with your stretch stitch.  Use a 1/4 to 3/8 inch seam allowance, depending on how wide you want your binding to be.  Important: As you are sewing, use your right hand to stretch the binding fabric slightly.  If you pull it too tightly, your main fabric will pucker, but if you don’t stretch it at all, it will gap around the neck and arm holes.  Apply a light tension to it as you go and you’ll be fine.  If you’d like, practice a little bit first using scraps from your 2 fabrics.  Also be sure your main fabric doesn’t stretch at all.

Apply the binding all around the neck seam, cutting off any excess binding.  Depending on what seam allowance you chose, you might also want to trim the seam allowance down to about 1/8 inch so it doesn’t flip out to the front.  If it still wants to flip up a little, don’t worry.  Once it is on the wearer, it won’t do this.

Step 11:

Starting at the binding, sew across the remaining shoulder seam.

Step 12:

On the wrong side, you will see a fairly large and bulky seam allowance.

Trim the seam allowance on the back side of the dress to about 1/8 inch.

Then fold the longer seam allowance over the short one.  Tack it down by stitching down the binding forward and backward once.  You don’t need to stitch all the way down the shoulder seam.

Here is a picture of the binding tacked down on a different dress.  If you can’t really see it, that’s the point!

Step 13:

Apply the binding to both arm holes by repeating step 10.

Step 14: 

Starting at the binding, stitch the front and back pieces together at the side seams, right sides together.

Step 15:

Iron up the hem.  Because knit won’t fray, you only need a single fold hem.  If possible, try it on your wearer and determine hem depth from them.   If your wearer is not available, follow these guidelines: If you are making the smaller size (ie: a 5 in the size 5-6, a 7 in the size 7-8), iron up 1-1.5 inches.  If you are making the larger size (or a size 2), iron up .5 inches.

Step 16:

Hem the dress.  You can use a single or double row of straight stitches with a slightly longer stitch length, or you can use a double needle or coverhem machine.  Whatever is available to you is fine.

Step 17:

Stand back and admire!  Have a good friend pat you on the back!  If you’re so inclined and you’re reading this before the end of May 2012, send your beautiful new creation to so she can send it on to Africa for you!

I’ll be sending the one above and the one below, along with some fabric and notions from my stash.  Two handmade dresses may seem like too little to really make a difference, given all the unmet needs in this world.   But as the saying goes, it makes a difference to those two.  And that makes it worth it.

Related


Related news:


Wedding dresses sweetheart neckline ball gown 2018
English style homes 2018
Yellow highlights in brown hair 2018
Olive bridesmaid dresses 2018
Black and green dress 2018
Dark green prom dresses under 0 2018
Friendship bracelets with names patterns